IntelliDoX system for BW Clips

For Use with the CO and H2S Detectors

Reset alarm points
Data retrieval without network access
Active hibernation for extended life of Clip Detectors

IntelliDoX System (Out of Stock)

The IntelliDoX Service Kit must also be purchased for proper use

The IntelliDoX System combines smart docking modules and device management software to provide you with automated gas detector management. This will help you drive productivity through fast data transfers without a network, automated and expedited bump tests, and the ability to change the detector settings.  You can gang up to five IntelliDoX for even greater productivity, and each module can function independently, managing fleets of detectors, all simultaneously. The IntelliDoX is easy to install, taking under 2 minutes from the setup to performing your first detectors bump test. Each module has its own operating system, LCD screen, and internal pump, allowing you to perform more than one operation at the same time. Even if you wanted to bump test three detectors and calibrate two others at the same time, you can get more done at once. Configure the low and high alarm setpoints – plus other detector parameters – throughout the lifespan of the detector. So you can rely on your detector to always work the way you want it to.

IntelliDoX System Features

  • FastBump test that eliminates bottlenecks, while avoiding costly purge cycles that waste gas
  • Gangable up to five modules, each with its own LCD screen and keypad for independent operation
  • Easy to set up with no tools required
  • Easy to connect via Ethernet to a network
  • USB port to easily configure dock module settings or retrieve data without network access
  • Automated bump test and span calibration operation
  • Device management with Safety Suite Device Configurator
  • Modular nests for device changes
  • Bump testing, calibration, configuration, and record-keeping support for compatible detectors.

User Updatable Features

  • Configure alarm settings
  • Display gas reading during alarm
  • Enable non-compliance indicator
  • Hibernate detector
  • Schedule bump test and calibration reminders
  • Transfer event logs
  • Time display preferences
  • Update firmware

 

The IntelliDoX System Data Sheets Available Here